Compatible with these airsoft guns:
-
- M4, M16, HK416, AR15 with V2-Gearbox according to TM-Design
- M4 with V2 gearbox according to Krytac design
- SR25 with V2-Gearbox according to TM-Design
- MP5 with V2-Gearbox according to TM-Design
- G3 with V2-Gearbox according to TM-Design
- M249 with V2-Gearbox according to TM-Design
- M107 BARRETT from the company Snow wolf
Not compatible with:
-
- KWA-Gearbox V2.5
- S&T or Arcturus Gearbox V2
- ICS SSS Gearbox V2
- Ares Amoeba Gearbox V2
- G&G G2 Gearbox V2
- APS eSilver edge Gearbox V2
- Gearbox V2 with microswitch
MAIN FEATURES:
- New shooting modes independent for each position of the fire selector switch (SAFE - SEMI - AUTO).
- Three adjustable firing sequences (range 2 - 20 rounds)
- The detection of an empty magazine remains the same as in the original weapon
- The rate of fire can be reduced to 40%. It adds pauses between shots to reduce RoF. Fast trigger response even at very low rate of fire, just like a real gun
- Adjustable strength of active brake (can be disabled).
- Pre-cocking function for immediate firing in case of SEMI fire
- Delay between shots adds time in which firing is not possible, it simulates the delay caused by reloading or recoil (range 0.1 - 4.0 seconds)
- Electronic fuse to detect high currents to prevent damage if something goes wrong
- Low battery indicator for 2S - 4S li-pin and 3S - 4S li-fe
- Virtual magazine simulates low capacity magazines, it forces the gun to stop when it reaches 0. It is possible to set a warning after the shot, before the magazine is empty and how it will be reloaded
- There are input and output connectors on the board to control external devices or Leviathan
- The statistics screen shows firing performance with cycle time, motor power consumption, rate of fire and temperatures. It allows to improve the fine tuning of the gearbox
- The application displays the current battery voltage value. Colored lines indicate the battery charge level, where green means OK, orange warns after each shot, and red does not allow shooting
- User can save multiple settings under profiles
- The update function fixes bugs and adds new features to the device
- There are three shot counters. The total counter counts every shot during the life of the device. The user counter can be reset by the user at any time. The power-on counter is reset by connecting the battery
- The error log displays errors that occurred during the life of the unit and can be cleared by the user.
- To increase security, the wireless connection can be disabled via the selector switch (can be disabled)
- Leviathan monitors current, voltage and temperature to prevent damage if something goes wrong.
- The motor vibrates and beeps as feedback to the user
- Programmed settings are saved to Leviathan's memory as soon as they are changed, so you can test it immediately and settings are not lost if the battery is disconnected or the smartphone is disconnected
- New features are free for every user via the online update feature
FIRE MOODS:
Independent for each position on the fire selector switch (SAFE - SEMI - AUTO).
- SAFE: no trigger response.
- Semi: fires one shot per trigger pull.
- Semi/BurstX: short trigger fires a single shot, long trigger fires a series.
- Binary trigger: fires a single shot when the trigger is pulled and another single shot when it is released.
- BurstX: The gun fires one series per trigger pull.
- BurstX+BurstY: short pull of the trigger triggers BurstX, long pull of the trigger triggers BurstX+BurstY.
- BurstX/Full: Short squeeze of the trigger triggers BurstX, long squeeze of the trigger results in auto fire.
- Full: The weapon fires automatically until the trigger is released.
- Virtual Reload: Pull trigger to reload virtual magazine.
EXTERNAL INPUT:
Works with input terminal
leviathan-V2_optical_IN
- OFF: Any signal at the input terminal will be ignored.
- External trigger: the gun trigger is disabled and replaced by a microswitch connected to the input (SIG and GND)
- Burst 3 trigger: the microswitch connected to the input (SIG and GND) triggers 3 bursts when pressed. The pistol trigger is still functional.
- AUG trigger: Dial detection is disabled. Pistol trigger is set to selector on semi. Microswitch connected to input (SIG, GND) is set to selector on auto.
- Empty magazine (NO): The microswitch activates empty magazine detection when SIG is connected to GND.
- Empty magazine (NC): The microswitch activates the detection of an empty magazine when SIG is not connected to GND.
- Virtual reload: The microswitch activates the reloading of the virtual magazine when SIG is connected to GND.
EXTERNAL OUTPUT:
Works with output terminal:
leviathan-V2_optical_OUT
- OFF: Output works only when activated by input.
- Motor: Output terminal is ON with gun motor + with IN activation.
- Motor + Xs: Output terminal is ON with gun motor with time delay after gun motor deactivation + with IN activation.
- Always ON: Output terminal is always on.
Please observe the legal situation when using this product; here in DE WaffG in the current version
