Softair - Rifle - Ares x Kel Tec RDB - S-AEG - over 18, over 0.5 joules

The shooting glasses of the manufacturer Invader Gear convinces with a very good price-performance ratio and high quality standards. With your 29g and the rubberized bridge plates, the glasses are very comfortable to wear. The large lenses go beyond the eye rims and offer optimal protection due to the ergonomic shape, which is adapted to the face. The temples are adjustable by 1.2 cm in length and can thus be individually adapted to the shooter. On the right and left side of the temple there is an eyelet to which a strap can be attached to protect against loss or for better grip.

Plastic - Clear

Important item for all crossbow shooters.

Color: clear plastic

Lightweight and comfortable to carry.

Swiss Arms safety glasses meet the strict ANZI Z87.1 standard and are CE approved. The lenses are treated to reduce harmful UV rays and prevent scratches.

The solid replica of the T1 from Aim-O is made of aluminum. The front and rear open high mount allows the shooter to either still use the standard sights of the respective weapon, or to perceive the lower environment of the target. The Dot can be set to green and red in 5 brightness levels each.

The caps of the horizontal and vertical adjustment are unscrewed to the tool to turn the adjustment screw itself. The Dot no longer comes with the rubber protective caps for the lenses that have been known since, but with a plastic cover that can be locked firmly in place. The quick release allows the optic to be attached to any rail without much effort and fits bombproof without tools. Typical of Aim-O, the workmanship here is also very high quality and the finish of the surface is without any blemish.

Also the required CR1632 battery is included and already installed. A cleaning cloth and a wrench to adjust the quick release complete the scope of delivery of the T1.

• suitable for 21-23 mm rail tracks
• Color: Black
• Material: aluminum
• Luminous point: red/green
• lens diameter: 24mm
• length: 74mm
• Height: 40mm
• Weight: 140gr
• Shockproof, waterproof, anti-reflective, scratch-resistant surface
• QD version

This high-quality Graphic Sight is a replica of a well-known EOTech Holosight, which is especially suitable for fast reaction shooting. It is mostly made of metal. Only the battery cover is made of high quality plastic. The metal frame protects the lens from dirt and damage. The quick release allows the optic to be conveniently and firmly mounted on any 20-22mm rail.

The reticle of the optic can be set in either red or green (operable via the NV button). In addition, the reticle can be set in 20 different brightness levels to match the conditions in the field. In addition, the optics are adjustable in height and side. Due to the special design, it is also possible to aim with both eyes open. Thus, the usual tunnel vision does not arise when aiming and you also keep the environment of the target further in the eye.

Requires two AA batteries (not included) for operation. A small cleaning cloth completes the scope of delivery.

The 1x32 Red Dot is a replica of a well-known riflescope. Here now as 1x32 Red/ Green Dot without magnification. The reticle can be adjusted between the colors green and red and in each case in 5 brightness levels. The illuminated dot can of course also be adjusted in height and direction. The adjustment points are located under the caps to prevent accidental rotation. In the upper area of the red dot sight, there is also an emergency sight that can be used for short distances.

The red dot sight is powered by 3x AG9 (LR936) button cells (not included).
The robust Red/ Green Dot with metal housing can be stably attached to 22mm Picatinny rails via 2 screws.

Aim-O is known for its well-made replicas of optics in the softair field. The replica of the well-known G33 magnifier, which many know in connection with the XPS 3
from Eo-Tech, is no exception. The magnifier is high quality and solidly manufactured. The G33 can be easily mounted on any rail without any tools using the original quick-release
on each rail and sits bombproof. So that a use with different optics is possible, there is a 6mm spacer with separate screws in the scope of delivery. With this, the height of the G33 can be varied.

For protection and grip, the rear part of the G33 is covered with rubber, which makes it easy for the shooter to fold the G33 to the optic or to the side in all weather conditions and humidity. The magnifier has separate elevation and windage adjustment to centrally display the reticle of the main optic itself and can also be adjusted in focus.

Specifications

The solid replica of the T1 from Aim-O is made of aluminum. The front and rear open high mount allows the shooter to either still use the standard sights of the respective weapon, or wahnahme the lower environment of the target. The Dot can be set to green and red in 5 brightness levels each.

The caps of the horizontal and vertical adjustment are unscrewed to the tool to turn the adjustment screw itself. The Dot no longer comes with the rubber protective caps for the lenses that have been known since, but with a plastic cover that can be locked firmly in place. The quick release allows the optic to be attached to any rail without much effort and fits bombproof without tools. Typical of Aim-O, the workmanship here is also very high quality and the finish of the surface is without any blemish.

A cleaning cloth and a wrench to adjust the quick release complete the scope of delivery of the T1.

• suitable for 21-23 mm Rail rails
• Color: BLACK/DARK EARTH
• Material: Aluminum
• Color of the Dots: RED/GREEN
• Viewing window: 24mm
• Length: 74mm
• Height: 40mm
• Weight: approx. 140g
• Battery: 1x CR1632 battery (NOT included)

Feature:

• Shockproof and waterproof
• With anti-reflective, scratch-resistant surface
• Ultra fast target acquisition
• Lens protection caps included
• Quick release QD version

Das Aim-O 1×32 ACOG ist ein Zielfernrohr mit 1x fester Vergrößerung und zwei Absehen-Farboptionen: ACOG mit Red Dot & ACOG mit Green Dot. Das ACOG-Gehäuse ist extrem robust und zuverlässig. Mit einem Gewicht von nur etwa 500 g ist dieses Rotpunkt-Visier perfekt für sich schnell bewegende taktische Teams, die auf engstem Raum operieren, oder für geschwindigkeitsorientierte Wettkampfstätten. Das Gehäuse aus massiver Aluminiumlegierung hält starken Vibrationen und sogar versehentlichem Herunterfallen stand und gewährleistet so seine Zuverlässigkeit.

Spezifikation:

• Dot: rot/grün
• Gewicht: 500 gr
• Vergrößerung: 1x
• Farbe: Schwarz
• Länge: 160 mm
• Material: Aluminium
• Beschichtung: Mehrschichtige Linse
• Batterie: 3x LR48 (NICHT ENTHALTEN)

Merkmale:

• Leicht und einfach zu tragen
• Klare Bildgebung und präzises Zielen
• Die Kalibrierung kann angepasst werden
• Seiten- und Höhenverstellung
• Wasserfest, stoßfest und beschlagfrei

Specifications

• Red Dot EOTECH Style
• Model: RD558
• Color: Black
• Light color: red/green (side switch)
• Intensity: multi-level
• Magnification: 1x
• Reticulum: 1 reticulum at seeker temperature
• Operating range: Down to -40°C
• Transmission Holographic: Parallax free at 100%
• Lens diameter: 30x23mm with anti-reflective and scratch resistant surfaces
• Size: 136x55x60mm
• Weight: 300gr.
• Battery: 2x AA (NOT INCLUDED)
• Material: Aluminum
• Mounting: 20mm Weaver Picatinny (QUICK RELEASE)
• Calibration settings: up/down - left/right
• eye relief: unlimited
• ultra fast target acquisition
• wide field of view
• shockproof

The solid replica of the T1 from Aim-O is made of aluminum. The front and rear open high mount allows the shooter to either still use the standard sights of the respective weapon, or wahnahme the lower environment of the target. The Dot can be set to green and red in 5 brightness levels each.

The caps of the horizontal and vertical adjustment are unscrewed to the tool to turn the adjustment screw itself. The Dot no longer comes with the rubber protective caps for the lenses that have been known since, but with a plastic cover that can be locked firmly in place. The quick release allows the optic to be attached to any rail without much effort and fits bombproof without tools. Typical of Aim-O, the workmanship here is also very high quality and the finish of the surface is without any blemish.

A cleaning cloth and a wrench to adjust the quick release complete the scope of delivery of the T1.

• suitable for 21-23 mm Rail rails
• Color: BLACK/DARK EARTH
• Material: Aluminum
• Color of the Dots: RED/GREEN
• Viewing window: 24mm
• Length: 74mm
• Height: 40mm
• Weight: approx. 140g
• Battery: 1x CR1632 battery (NOT included)

Feature:

• Shockproof and waterproof
• With anti-reflective, scratch-resistant surface
• Ultra fast target acquisition
• Lens protection caps included
• Quick release QD version

Biodegradable heavyweight BB's for snipers and rifles with very high muzzle energy. Contributes significantly to maximum precision of your weapon.

1000 pieces
5.95mm diameter
+/- 0.01mm tolerance
Biodegradable

In our BBs, a special manufacturing process virtually prevents the formation of air bubbles inside the ball. This results in an optimal center of gravity, which guarantees a stable and precise trajectory of the ball.

The OpTacs BBs are characterized by their perfect ball shape and a high quality standard in manufacturing.
During the manufacturing process, ISO 3290-2001 G1/GO, CE, CTS certification is adhered to, thus achieving a diameter tolerance of 5.95 +/- 0.01 mm.

At the end of the process, the BBs are polished 17 times to guarantee a perfect surface. Through this, the bullets feed perfectly in the magazine and are ideally suited for both standard and tuning barrels.


Features:

- 4000 pieces
- 0,25 gram ball weight
- Color: white
- 5.95+/- 0.01 mm
- optimal ball center of gravity
- 17 times polished
- perfect feeding in the magazine
- suitable for all common AEG / Spring and gas softair weapons
- organic

Selection: -> Premium

The BBs are tested in batches and divided into the classes Premium, Supreme and Ultimate. Here, the tolerance in the dimensions and the weights are taken as a basis for assessment.

In our BBs, a special manufacturing process virtually prevents the formation of air bubbles inside the ball. This results in an optimal center of gravity, which guarantees a stable and precise trajectory of the ball.

The OpTacs BBs are characterized by their perfect ball shape and a high quality standard in manufacturing.
During the manufacturing process, ISO 3290-2001 G1/GO, CE, CTS certification is adhered to, thus achieving a diameter tolerance of 5.95 +/- 0.01 mm.

At the end of the process, the BBs are polished 17 times to guarantee a perfect surface. Through this, the bullets feed perfectly in the magazine and are ideally suited for both standard and tuning barrels.


Features:

• 4000 pieces
• 0,25 gram ball weight
• Color: white
• 5.95+/- 0.01 mm
• optimal ball center of gravity
• 17 times polished
• perfect feeding in the magazine
• suitable for all common AEG / Spring and gas softair weapons
• Bio

Selection: -> Ultimate

The BBs are tested in batches and divided into the classes Premium, Supreme and Ultimate. Here, the tolerance in the dimensions and the weights are taken as a basis for assessment.

In our BBs, a special manufacturing process virtually prevents the formation of air bubbles inside the ball. This results in an optimal center of gravity, which guarantees a stable and precise trajectory of the ball.

The OpTacs BBs are characterized by their perfect ball shape and a high quality standard in manufacturing.
During the manufacturing process, ISO 3290-2001 G1/GO, CE, CTS certification is adhered to, thus achieving a diameter tolerance of 5.95 +/- 0.01 mm.

At the end of the process, the BBs are polished 17 times to guarantee a perfect surface. Through this, the bullets feed perfectly in the magazine and are ideally suited for both standard and tuning barrels.


Features:

- 5000 pieces
- 0,20 gram ball weight
- Color: white
- 5.95+/- 0.01 mm
- optimal ball center of gravity
- 17 times polished
- perfect feeding in the magazine
- suitable for all common AEG / Spring and gas softair weapons
- organic

Selection: -> Premium

The BBs are tested in batches and divided into the classes Premium, Supreme and Ultimate. Here, the tolerance in the dimensions and the weights are taken as a basis for assessment.

In our BBs, a special manufacturing process virtually prevents the formation of air bubbles inside the ball. This results in an optimal center of gravity, which guarantees a stable and precise trajectory of the ball.

The OpTacs BBs are characterized by their perfect ball shape and a high quality standard in manufacturing.
During the manufacturing process, ISO 3290-2001 G1/GO, CE, CTS certification is adhered to, thus achieving a diameter tolerance of 5.95 +/- 0.01 mm.

At the end of the process, the BBs are polished 17 times to guarantee a perfect surface. Through this, the bullets feed perfectly in the magazine and are ideally suited for both standard and tuning barrels.


Features:

• 5000 pieces
• 0,20 gram ball weight
• Color: white
• 5.95+/- 0.01 mm
• optimal ball center of gravity
• 17 times polished
• perfect feeding in the magazine
• suitable for all common AEG / Spring and gas softair weapons
• Bio

Selection: -> Ultimate

The BBs are tested in batches and divided into the classes Premium, Supreme and Ultimate. Here, the tolerance in the dimensions and the weights are taken as a basis for assessment.

Bei unseren BBs wird durch ein spezielles Herstellungsverfahren die Bildung von Luftblasen im Inneren der Kugel nahezu verhindert. Hierdurch ergibt sich ein optimaler Schwerpunkt, der eine stabile und präzise Flugbahn der Kugel garantiert.

Die OpTacs BBs zeichnen sich durch ihre perfekte Kugelform und einen hohen Qualitätsstandard bei der Fertigung aus.
Beim Herstellungsprozess wird die ISO 3290-2001 G1/GO, CE, CTS Zertifizierung eingehalten und somit die Diameter Toleranz 5,95 +/- 0.01 mm erreicht.

Zum Abschluss des Verfahrens werden die BBs 17 fach poliert, um eine perfekte Oberfläche zu garantieren. Hierdurch feeden die Kugeln perfekt im Magazin und sind sowohl für Standard wie auch Tuningläufe bestens geeignet.


Merkmale:

- 3000 Stück
- 0,30 Gramm Kugelgewicht
- Farbe: weiß
- 5.95+/- 0.01 mm
- optimaler Kugelschwerpunkt
- 17 fach poliert
- perfektes Feeding im Magazin
- für alle gängigen AEG / Spring und Gas Softairwaffen geeignet

Selection:  -> Premium

Die BBs werden in Chargen getestet und in die Klassen Premium, Supreme und Ultimate eingeteilt. Hier wird die Toleranz bei den Abmessungen und den Gewichten als Bemessungsgrundlage genommen.

In our BBs, a special manufacturing process virtually prevents the formation of air bubbles inside the ball. This results in an optimal center of gravity, which guarantees a stable and precise trajectory of the ball.

The OpTacs BBs are characterized by their perfect ball shape and a high quality standard in manufacturing.
During the manufacturing process, ISO 3290-2001 G1/GO, CE, CTS certification is adhered to, thus achieving a diameter tolerance of 5.95 +/- 0.01 mm.

At the end of the process, the BBs are polished 17 times to guarantee a perfect surface. Through this, the bullets feed perfectly in the magazine and are ideally suited for both standard and tuning barrels.


Features:

• 3000 pieces
• 0,30 gram ball weight
• Color: white
• 5.95+/- 0.01 mm
• optimal ball center of gravity
• 17 times polished
• perfect feeding in the magazine
• suitable for all common AEG / Spring and gas softair weapons

Selection: -> Ultimate

The BBs are tested in batches and divided into the classes Premium, Supreme and Ultimate. Here, the tolerance in the dimensions and the weights are taken as a basis for assessment.

In our BBs, a special manufacturing process virtually prevents the formation of air bubbles inside the ball. This results in an optimal center of gravity, which guarantees a stable and precise trajectory of the ball.

The OpTacs BBs are characterized by their perfect ball shape and a high quality standard in manufacturing.
During the manufacturing process, ISO 3290-2001 G1/GO, CE, CTS certification is adhered to, thus achieving a diameter tolerance of 5.95 +/- 0.01 mm.

At the end of the process, the BBs are polished 17 times to guarantee a perfect surface. Through this, the bullets feed perfectly in the magazine and are ideally suited for both standard and tuning barrels.


Features:

- 4000 pieces
- 0,25 gram ball weight
- Color: white
- 5.95+/- 0.01 mm
- optimal ball center of gravity
- 17 times polished
- perfect feeding in the magazine
- suitable for all common AEG / Spring and gas softair weapons

Selection: -> Premium

The BBs are tested in batches and divided into the classes Premium, Supreme and Ultimate. Here, the tolerance in the dimensions and the weights are taken as a basis for assessment.

• patch pocket for accessories / ammunition
• Adjustable shoulder strap for secure carrying on the back
• Soft lining
• Zipper with eyelets to attach a lock or cable tie

The robust case made of impact-resistant plastic has a foam insert and is suitable for long rifles and several handguns. Matching gun locks are available separately.

Delivery without contents!

Color: dark blue
Material: impact resistant plastic
Inner dimensions: approx. 118 x 23 cm
Weight: 2.700 g

ALLEN Sawtooth Rifle Bag - 52 Inch

Large rifle bag with foam padding, self-healing zipper and padded handle. Outside is an additional pocket (5 x 8 inches) for accessories.


Color: black / camo

Dimensions:
Length: 52 inches / approx. 137.5 cm
Height: approx. 23 cm

• L/W/H : 98 x 38 x 15 cm
• Internal Size : 90 x 33 x 10,5 cm
• 4 sturdy closures
• Integrated name pocket
• Foam padding
• Extremely durable
• Color : Black
• 2 eyelets for lock or cable tie

• L/W/H : 98 x 38 x 15 cm
• Internal Size : 90 x 33 x 10,5 cm
• 4 sturdy closures
• Integrated name pocket
• Foam padding
• Extremely durable
• Color : Tan
• 2 eyelets for lock or cable tie

Sturdy case for long guns and accessories

• With wheels for easy transport
• Eyelets for attaching a lock
• Robust pressure locks
• Pre-perforated inner foam, which can be easily cut to fit your own weapon
• Color: Black
• Waterproof with pressure equalization valve
• Outside dimension: 97,8 x 42 x 17,5 cm
• Inner dimension: 93,0 x 36 x 15,2 cm
• Ideal for MPs and smaller assault rifles

Sturdy case for long guns and accessories

• With wheels for easy transport
• Eyelets for attaching a lock
• Robust pressure locks
• Pre-perforated inner foam, which can be easily cut to fit your own weapon
• Color: Black
• Waterproof with pressure equalization valve
• Outer dimension: 118,9 x 40, 5 x 16,0 cm
• Inner dimension: 113,8 x 35,1 x 13,3 cm
• Ideal for assault rifles and sniper rifles

Sturdy case for long guns and accessories

• With wheels for easy transport
• Eyelets for attaching a lock
• Robust pressure locks
• Pre-perforated inner foam, which can be easily cut to fit your own weapon
• Color: OD-Green
• Waterproof with pressure equalization valve
• Outer dimensions: 97,8 x 42 x 17,5 cm
• Inner dimension: 93,0 x 36 x 15,2 cm
• Ideal for MPs and smaller assault rifles

• protects against rust
• displaces water cleans, lubricates, preserves
• especially suitable for sporting and recreational weapons